Moose Knuckle Mohawk Receiver 2.0 x 5/8

This shackle receiver is perfect for your SxS, UTV or ATV with a 2.0 inch hitch tube!

Mohawk Receiver 2.0 x 5/8 - Black Lung

Our Mohawk 2.0 x 5/8 shackle receiver has a narrower shackle mounting point width than its predecessor and is made specifically for UTV's, Side-by-Sides and smaller 5/8 shackle ear widths but still offers the flexibility to mount larger 3/4 shackles also. The Mohawk is warm drop forged using a stronger aluminum compared to the more commonly used 6061-T6 aluminum. Instead we use higher quality and higher cost 6082 aluminum for its higher strength, better mechanical properties and better corrosion resistance along with a forging technique that orientates the grain flow of the aluminum to maximize the strength of your connection point providing a work load limit of 7,000lbs.

Two hitch pin holes allow for two receiver mounting positions increasing compatibility with any 2 inch hitch package. The third hitch pin hole and included spacer allow you to rotate the receiver 90 degrees so you can mount a hitch ball with a 3/4" shank providing a towing tongue weight limit of 300lbs and a gross trailer weight of 3,500lbs while accepting a Class I/II hitch ball.

Most shackle receivers have sharp edges at the connection point which often tear soft shackles, synthetic ropes, tree savers and strap looped ends. The Mohawk 2.0 main mounting hole has a very large radius on the outer edges to reduce abrasion and increase the life of your recovery gear making this ideal for use with any closed loop recovery set up. The spined outer perimeter adds more material where you need it most and gives the Mohawk its aggressive and unique identity.

Receiver Specs:

• Color: Black Lung
• Material: Warm Drop Forged 6082 Aluminum
• Receiver Size: 2.0 inch
• Shackle Mounting Point Width: 0.984" (25.0mm)
• Shackle Fitment: 5/8" shackles with 3/4" pin diameter using supplied adapter sleeve (**will also accept 3/4 shackles with a 7/8 pin diameter without using included adapter sleeve)
• Coating: UV and Weather Proof Anodized Black w/ Laser etched Logos
• WLL (Work Load Limit): 3.5t or 7,000lbs
• G.T.W. (Gross Trailer Weight): 3,500lbs
• T.W. (Tongue Weight): 300lbs
• Ball Hitch Size: Spacer included to accept Class I / II hitch balls with 3/4" shank dia.

10% Off when you purchase a Shackle Receiver Combo Today! Click Here