Save an additional 5% off when you buy all three as a BUNDLE instead of a combo or separately!
CHOOSE your RECEIVER, B'OH SHACKLE COLOR and HITCH PIN STYLE
-
5 Mohawk Shackle Receiver 2.0 Hitch Mount Color Options
-
15 different 3/4 size Screw Pin Anchor Shackle Color Options
-
3 different Hitch Pin Styles
MOHAWK RECEIVER 2.0 HITCH
The Mohawk 2.0 is a serious upgrade from the typical machined billet hitch receiver. Made from higher grade warm-forged 6082 aluminum with flow-oriented grain for added strength, it’s rated for 10,000 lbs WLL (working load limit) and 50,000 lb MBS (minimum break strength) ready for whatever recovery or towing needs you throw at it.
It mounts to any standard 2" receiver and features dual pin holes for different mounting depths. A third hole allows for vertical orientation for greater pull angle versatility or with an included spacer sleeve — so you can also use it to mount a hitch ball with a ¾" shank (up to 3,500 lb trailer weight / 300 lb tongue weight with Class I/II balls).
Where most receivers chew up your soft shackles and strap loops, the Mohawk 2.0 protects them with a large radius on the pin hole, minimizing abrasion and extending the life of your gear. The spined body gives it our signature beefy, aggressive look while reinforcing key stress zones.
- 10,000 lb WLL with dual hitch pin holes for multiple mounting depths
- Accepts standard ¾" size shackles with a 7/8 diameter pin or soft shackles
- Third pin hole and spacer allow for vertical hitch ball mounting (Class I/II)
- Large radius edges reduce wear on straps and ropes
- Signature spined shackle mount body adds mass, strength, and style
B'OH SPIN PIN ANCHOR SHACKLE
A twist (pun intended) on a standard D-ring bow recovery shackle, our new B’oh Shackle features an innovative Two Finger Spin Pin design that keeps your pins and shackles joined together out on the trail—no more lost pins!
We teamed up with Owyhee Offroad Parts to solve the lost pin and tangled lanyard problem by adding a grooved channel around the pin flange that holds a weather-resistant stainless steel spin ring. The ring spins freely as you rotate the pin, letting the lanyard stay still and out of the way instead of wrapping around the pin when tightening or loosening your shackle. This also keeps the pin hole open so you can insert a tool to snug or loosen it without damaging the lanyard.
Built tough for serious recoveries, the 3/4-inch bow shackle features a tapered body that adds strength and material through its length, plus large curved soft-shackle-friendly edges to protect your ropes and gear. The B’oh Shackle fits any bumper shackle mount or receiver hitch bracket with a 7/8" pin hole and a 1-1/4" or narrower mount width.
- Features an innovative Two-Finger Spin Pin design with a stainless-steel spin ring, ensuring your shackle pin remains connected and resisting tangling of the attached lanyard.
- Built for serious recovery work: rated at a 10,000 lb working load limit (WLL) with a 5:1 factor of safety (FoS) giving this rugged shackle a 50,000 lb minimum break strength (MBS).
- Constructed from high-strength carbon steel (pin and body) with a 7/8″ (0.875″) diameter pin and M22 × 2.5 mm thread.
- Designed with a tapered bow body profile and large curved inner/outer edges to add strength and protect soft shackles, recovery ropes, and recovery rigging gear from damage.
- Includes a 210 lb rated, 7-strand stainless-steel wire rope lanyard coated in black vinyl — designed to resist abrasion and avoid scratching your bumper or gear.
- Fits mounts with up to a 1-1/4″ (1.25″) width and a 7/8″ pin-hole, making it compatible with many bumper shackle mounts or tow-shackle receiver brackets.
CHOOSE FROM THREE HITCH PIN STYLES
MOHAWK KEYED LOCK – Black Lung
Designed to pair perfectly with the Mohawk 2.0 receiver, this keyed locking hitch pin delivers tamper-resistant security without sacrificing style. Whether you're daily driving or crawling through brush, this lock is built to survive the elements and deter thieves.
The knurled locking head is easy to grip and includes a weather-sealed hinged Moose Knuckle logo cap with an internal o-ring to protect the key hole for prolonged smooth operation. The Black Lung finish extends across the lock housing and Grade 8 steel pin, offering sleek looks with serious corrosion resistance. An O-ring on the pin side helps seal out dust, grit, and water, so your lock works when you need it — even after miles of trail dust or highway slush.
Two logo-stamped keys are included, and our signature Mohawk spine on the pin head makes install and removal a breeze — even with gloves on.
- Grade 8 steel locking pin with weather-sealed knurled housing
- Durable Black Lung coating on both housing and pin
- O-ring seal keeps grit and water out of the mechanism
- Includes 2 Moose Knuckle logo keys and signature Mohawk-grip pin head
- Logo-stamped steel won’t chip or wear off like printed finishes
MOHAWK MOCK LOCK – Black Lung
Looks like a lock. Works like a quick-change pin.
The Mock Lock is a spring-loaded hitch pin designed to mimic the look of our Mohawk Keyed Lock, deterring theft while giving you fast, tool-free access to your hitch gear. Just push, twist, and pull to release — no keys required.
The stealthy knurled housing, Black Lung finish, and weather-sealed logo cap make it blend in like a real lock. Green and red dot indicators on the shaft give instant visual confirmation:
GREEN means GO. RED means REMOVE.
- Grade 8 steel pin with weather-resistant Black Lung coating
- Two invisible keys included with every Mock Lock...;) wink.
- Quick-release spring-loaded design — no keys required
- Knurled grip + Mohawk spine for easy handling
- Deep-stamped Moose logo won’t wear or peel
- 3.5 inches of usable length
⚠️ Note: This is a visual deterrent — not a locking device. Use at your own risk.
MOHAWK HITCH PIN w/ HAIR PIN CLIP – Black Lung
Built for fast swaps between your recovery gear and towing setup, the Mohawk Hitch Pin is a high-strength, no-nonsense solution for off-roaders who value function and fit. It’s made from Grade 8 steel and finished in our rugged Black Lung powder coat, with a stealthy Black Nickel-coated hairpin clip that blends seamlessly into your bumper hardware.
The signature Mohawk spine adds grip and style, while the deep-stamped Moose logo won’t peel or wear like surface prints. Whether you’re towing on-road or recovering off-road, this pin is ready for it.
- Grade 8 steel pin with durable Black Lung coating
- Black Nickel-coated hairpin clip for a stealth finish
- Mohawk spine grip and stamped Moose logo head
- 4.0 inches of usable length
Mohawk Receiver Specs:
- Color: 5 Color Options (Use the Dropdown menu above to choose)
- Material: Warm Forged 6082 Aluminum
- Receiver Size: 2.0 inch
- Shackle Size: 3/4" shackles with 7/8" pin diameter
- Coating: UV and Weather Proof Anodized Green w/ Laser etched Logos
- WLL (Work Load Limit): 5t or 10,000lbs
- G.T.W. (Gross Trailer Weight): 3,500lbs
- T.W. (Tongue Weight): 300lbs
- Ball Hitch Size: Spacer included to accept Class I / II hitch balls with 3/4" shank dia.
Shackle Specs:
- Color: 15 Color Options (Use the Dropdown menu above to choose)
- Item: 3/4 Screw Pin Anchor Shackle
- Pin Style: Screw
- WLL: 10,000 lb.
- MBS: 50,000 lb.
- FoS: 5:1
- Width Between Eyes: 1-1/2" (1.25")
- Finish: Powder Coated
- Pin Diameter: 7/8" (0.875")
- Thread Size: M22 x 2.5mm - 6H/6g
- Pin Material: Carbon Steel
- Body Material: Carbon Steel
The "Raw Dog" uncoated option is ready to add primer and paint or powder coating so you can color match your vehicle or just add any finish of your choosing. (***Please note: this option will show signs of weathering and rust if left uncoated.)
Mohawk Keyed Lock Specs:
- Pin Color: Black Lung
- Key Housing Color: Knurled Black Lung
- Key Type: One-Sided Flat Keys w/ Moose Knuckle Offroad Logo Plastic Bow Handle
- Pin Diameter Options: 5/8 inch ( Most Common size for Jeeps, Tacomas and Full Size Trucks )
- Usable Length Options: 5/8 inch - 3.5 inches
- Hitch Class: 5/8 inch - CLASS III/IV/V ( 2.0" and 2.5" Hitch Tube )
- Pin Material: Grade 8 Steel
- Key Housing Material: Grade 8 Steel
Mohawk Mock Lock Specs:
- Pin Color: Black Lung
- Key Housing Color: Knurled Black Lung
- Key Type: Two invisible keys included with every Mock Lock...;) wink.
- Pin Diameter Options: 5/8 inch ( Most Common size for Jeeps, Tacomas and Full Size Trucks )
- Usable Length Options: 5/8 inch - 3.5 inches
- Hitch Class: 5/8 inch - CLASS III/IV/V ( 2.0" and 2.5" Hitch Tube
- Pin Material: Grade 8 Steel
- Key Housing Material: Stainless Steel
Mohawk Pin w/ Hair Pin Clip Specs:
- Pin Color: Black Lung
- Clip Color: Black Nickel Coated
- Pin Diameter Options: 5/8 inch ( Most Common size for Jeeps, Tacomas and Full Size Trucks )
- Usable Length Options: 5/8 inch - 4.0 inches
- Hitch Class: 5/8 inch - CLASS III/IV/V ( 2.0" and 2.5" Hitch Tube )
- Material: Grade 8 Steel
- Clip Material: Stainless Steel
Manual: B'oh Two Finger Spin Pin Lanyard Recovery Shackle 3/4 Read First Instructions
Manual: Mohawk 2.0 Read First Instructions
Manual: Mohawk Keyed Hitch Pin Lock 5/8 Read First Instructions
Manual: Mohawk Mock Hitch Pin Lock 5/8 Read First Instructions
Manual: Mohawk Hitch Pin w/ Hair Pin Clip 5/8 Read First Instructions
Manual: Raw Dog Custom Color Coating Instructions
More Specs and Dimensions
View Other Color Options
