Save an additional 5% off when you buy all three as a BUNDLE instead of a combo or separately!
CHOOSE your RECEIVER, SPLIT SHACKLE® COLOR and HITCH PIN STYLE
6 Mohawk 2.0 Shackle Receiver Hitch Mount Color Options
15 different 3/4 size Split Shackle® Color Options
3 different Hitch Pin Styles
MOHAWK 2.0 RECEIVER HITCH
The Mohawk 2.0 is a serious upgrade from the typical machined billet hitch receiver. Made from higher grade warm-forged 6082 aluminum with flow-oriented grain for added strength, it’s rated for 10,000 lbs WLL (working load limit) and 50,000 lb MBS (minimum break strength) ready for whatever recovery or towing needs you throw at it.
It mounts to any standard 2" receiver and features dual pin holes for different mounting depths. A third hole allows for vertical orientation for greater pull angle versatility or with an included spacer sleeve — so you can also use it to mount a hitch ball with a ¾" shank (up to 3,500 lb trailer weight / 300 lb tongue weight with Class I/II balls).
Where most receivers chew up your soft shackles and strap loops, the Mohawk 2.0 protects them with a large radius on the pin hole, minimizing abrasion and extending the life of your gear. The spined body gives it our signature beefy, aggressive look while reinforcing key stress zones.
10,000 lb WLL with dual hitch pin holes for multiple mounting depths
Accepts standard ¾" size shackles with a 7/8 diameter pin or soft shackles
Third pin hole and spacer allow for vertical hitch ball mounting (Class I/II)
Large radius edges reduce wear on straps and ropes
Signature spined shackle mount body adds mass, strength, and style
JOWL® 3/4 SPLIT SHACKLE®
This is the shackle that changed the game. The patented JOWL® Split Shackle® delivers tool-free closed loop recovery with unmatched speed and ease. Instead of removing your shackles or reaching for soft shackles, just open the split jaws, insert your strap or rope, twist to engage, and you’re ready to pull. It’s that fast.
With its classic bow shackle silhouette, the Jowl® looks right at home on any bumper or hitch receiver — but beneath the surface, it's packed with innovation. The built-in anti-rattle pads eliminate chatter on rough trails. Pull-angle stops act as visual cues to help you keep your recovery safe and efficient.
Each shackle includes two 1.0mm, two 2.0mm and two 3.0mm nylon Rattle Rings isolator washers to center the unit on your bumper mounts or gussets, and the split shackle® hooks are fully coated in our signature finishes — interchangeable with other colorways for a custom look. The Nickel-plated Grade 8 carbon steel pin is held in place by dual M18 cap screws, making install easy with just a ¼" ratchet — no weird tools needed. Bonus: you only need to remove one screw to attach or detach from your rig.
Patented split shackle® design makes hook-ups fast and tool-less
Fits any D-ring mount with 7/8" pin hole and 1.25" or less width
Includes nylon Rattle Rings washers, rubber anti-chatter pads and tool adapter bits for precise noise free fitment
Nickel-plated Grade 8 carbon steel pin installs with two included M18 hex bolts
"Hooked" sides are interchangeable to create 225 different color combos
Designed to pair perfectly with the Mohawk 2.0 receiver, this keyed locking hitch pin delivers tamper-resistant security without sacrificing style. Whether you're daily driving or crawling through brush, this lock is built to survive the elements and deter thieves.
The knurled locking head is easy to grip and includes a weather-sealed hinged Moose Knuckle logo cap with an internal o-ring to protect the key hole for prolonged smooth operation. The Black Lung finish extends across the lock housing and Grade 8 steel pin, offering sleek looks with serious corrosion resistance. An O-ring on the pin side helps seal out dust, grit, and water, so your lock works when you need it — even after miles of trail dust or highway slush.
Two logo-stamped keys are included, and our signature Mohawk spine on the pin head makes install and removal a breeze — even with gloves on.
Grade 8 steel locking pin with weather-sealed knurled housing
Durable Black Lung coating on both housing and pin
O-ring seal keeps grit and water out of the mechanism
Includes 2 Moose Knuckle logo keys and signature Mohawk-grip pin head
Logo-stamped steel won’t chip or wear off like printed finishes
MOHAWK MOCK LOCK – Black Lung
Looks like a lock. Works like a quick-change pin.
The Mock Lock is a spring-loaded hitch pin designed to mimic the look of our Mohawk Keyed Lock, deterring theft while giving you fast, tool-free access to your hitch gear. Just push, twist, and pull to release — no keys required.
The stealthy knurled housing, Black Lung finish, and weather-sealed logo cap make it blend in like a real lock. Green and red dot indicators on the shaft give instant visual confirmation: GREEN means GO. RED means REMOVE.
Grade 8 steel pin with weather-resistant Black Lung coating
Two invisible keys included with every Mock Lock...;) wink.
Quick-release spring-loaded design — no keys required
Knurled grip + Mohawk spine for easy handling
Deep-stamped Moose logo won’t wear or peel
3.5 inches of usable length
⚠️ Note: This is a visual deterrent — not a locking device. Use at your own risk.
MOHAWK HITCH PIN w/ HAIR PIN CLIP – Black Lung
Built for fast swaps between your recovery gear and towing setup, the Mohawk Hitch Pin is a high-strength, no-nonsense solution for off-roaders who value function and fit. It’s made from Grade 8 steel and finished in our rugged Black Lung powder coat, with a stealthy Black Nickel-coated hairpin clip that blends seamlessly into your bumper hardware.
The signature Mohawk spine adds grip and style, while the deep-stamped Moose logo won’t peel or wear like surface prints. Whether you’re towing on-road or recovering off-road, this pin is ready for it.
Grade 8 steel pin with durable Black Lung coating
Black Nickel-coated hairpin clip for a stealth finish
Mohawk spine grip and stamped Moose logo head
4.0 inches of usable length
Mohawk Receiver Specs:
Color: 6 Color Options(Use the Dropdown menu above to choose)
Material: Warm Forged 6061-T6 Aluminum
Receiver Size: 2.0 inch
Shackle Size: 3/4" shackles with 7/8" pin diameter
Coating: UV and Weather Proof Anodized Green w/ Laser etched Logos
WLL (Work Load Limit): 5t or 10,000lbs
G.T.W. (Gross Trailer Weight): 3,500lbs
T.W. (Tongue Weight): 300lbs
Ball Hitch Size: Spacer included to accept Class I / II hitch balls with 3/4" shank dia.
Shackle Specs:
Color: 15 Color Options(Use the Dropdown menu above to choose)
Item: 3/4 Anchor Shackle / Split Shackle
Pin Style: Screw
WLL: 10,000 lb.
MBS: 50,000 lb.
FoS: 5:1
Width Between Eyes: 1-1/4" (1.25")
Finish: Powder Coated
Pin Diameter: 7/8" (0.875")
Thread Size: M18 x 2.5mm - 6H/6g
Pin Material: Carbon Steel
Body Material: Chromoly Steel
PATENT No. D1,050,874
The "Raw Dog" uncoated option is ready to add primer and paint or powder coating so you can color match your vehicle or just add any finish of your choosing. Only the Jowl® hooked bodies should be powder coated, not the pin. Coating the pin will hinder the assembly functionality. (***Please note: this option will show signs of weathering and rust if left uncoated.)
⚠️ WARNING: This product or its packaging contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information visit: www.P65Warnings.ca.gov
